MONITOR YOUR STATIONARY GAS TANK LEVEL IN REAL TIME WITH VERY HIGH ACCURACY.
Remove only the two small screws that secure the original dial.
Use the Free App
Installation in minutes
Greater control of your gas tank using your smartphone or the indoor unit.
Set up with the free App
Download the "Cuby Smart" App, create an account and configure the indoor unit (display).
The Display you can place anywhere in the house, it is suggested that it go in the kitchen so you can easily see the gas level without having to use your cell phone.
- The Display only needs to be connected to a plug and Wifi.
- All the functions of the application are completely free
Remove the original tank dial
Place the wireless sensor
Put the Cuby Helios wireless sensor for LP gas in the correct orientation where the original faceplate was and use the 2 included screws to secure it. DO NOT remove the 4 screws that secure the float to the tank.
Once placed, the sensor will display the current gas level on its screen and will begin reporting in real time.
CUBY HELIOS
Sensor + Display
DISPLAY
GAS SENSOR
Visualize the gas level inside your home, only requiring a plug and WiFi.
ALARMS AND ALERTS
LOW GAS LEVEL
GAS ALARM IN THE ENVIRONMENT
GAS RECHARGE
Get real-time, current readings of the LP gas level from the moment it is placed in the tank.
ALARMS AND ALERTS
DISPLAYED DIRECTLY ON THE DISPLAY OR APPLICATION ON YOUR PHONE
Use it for any
activity
Residential
Homes
Vacation RentalApartments
Services
Restaurants
Hotels
Sports Centers
Businesses
Tortilla Shop
Bakery
Pastry Shop
Laundry
Industry
Food Manufacturing
Production Plants
Frequently Asked Questions
How do you connect to the internet?
The Cuby Helios LP gas tank level measurement system consists of 2 parts: Display and Tank Sensor.
-
The tank sensor is 100% wireless and communicates with the display via a very long-range signal (up to 200 meters).
-
The display connects to the internet via WiFi and keeps all the data stored in the cloud in sync so you can access it from anywhere in the world in real-time from the app.
Is it difficult to install?
Takes only a few minutes, anyone can do it.
- Connect the Display inside the house, it can be in the kitchen, use the App to configure the Display.
- Remove the original faceplate from your stationary gas tank. Being careful to only remove the 2 screws that hold it.
- Place and screw in the Tank Sensor, using the 2 included screws.
What guarantees does it have?
- 1 year warranty against manufacturing defects
- Satisfaction guarantee. Easy and free returns for 30 days
Can it be used without internet?
If it can be used without internet.
If you don't have an internet connection or don't want to use the app's functions, simply connect the display to a power outlet and it will show the tank readings directly on its screen.
For the initial setup process in the app, an internet connection is required, which can be via mobile data.
What temperature does it support?
The sensor is designed to work up to 70°C, but it is suggested not to operate it above 50°C, as high temperatures decrease battery life.
When the stationary gas tank has its lid on, the temperature remains low even when the sun is hitting it directly.
How long does the battery last?
The stationary tank sensor uses a CR123A battery that lasts on average 2 to 4 years and is easily replaced.
How accurate is it?
It is one of the most accurate sensors on the market thanks to its design.
The sensor has an error of +- 1% although in most cases its readings usually give errors of only 0.5% or less.
Is it waterproof?
Yes, the sensor is completely waterproof, with IP67 protection.
In addition to the protection, it has an internal humidity sensor that will alert you in case of water ingress. This could only happen if someone opened it and didn't close it correctly.
How often do you report?
Report every 2 hours or every time the gas reading changes by a certain percentage (0.3% in current versions).
When it detects that gas is being dispensed, it reports every 10 seconds. This allows for real-time readings.